Part Number Hot Search : 
CH500 B1535 TN100A MAX685 133BG B80NF0 25CL64 DTC143
Product Description
Full Text Search
 

To Download TLE4966-3K Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  sense & control datasheet rev.1.0, 2010-09-20 TLE4966-3K high sensitivity automotive hall switch with direction detection
edition 2010-09-20 published by infineon technologies ag 81726 munich, germany ? 2010 infineon technologies ag all rights reserved. legal disclaimer the information given in this docu ment shall in no event be regarded as a guarantee of conditions or characteristics. with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infine on technologies hereby disclaims any and all warranties and liabilities of any kind, including witho ut limitation, warranties of non-infrin gement of intellectua l property rights of any third party. information for further information on technology, delivery terms and conditions and prices, please contact the nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements, components may contain dangerous substances. for information on the types in question, please contact the nearest infineon technologies office. infineon technologies compon ents may be used in life-su pport devices or systems only with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safe ty or effectiveness of that de vice or system. life support devices or systems are intended to be implanted in the hu man body or to support an d/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
datasheet 3 rev.1.0, 2010-09-20 TLE4966-3K trademarks of infineon technologies ag abm?, bluemoon?, convergate?, cosic?, c166?, falc?, geminax?, goldmos?, isac?, omnitune?, omnivia?, prosoc?, serocco?, sicofi?, sieget?, smarti?, smint?, socrates?, vinax?, vinetic?, voipro ?, x-gold?, xmm?, x-pmu?, xway? other trademarks microsoft ? , visio ? , windows ? , windows vista ? , visual studio ? , win32 ? of microsoft corporation. linux ? of linus torvalds. framemaker ? , adobe ? reader?, adobe audition ? of adobe systems incorporated. apoxi ? , comneon? of comneon gmbh & co. ohg. primecell ? , realview ? , arm ? , arm ? developer suite? (ads), multi-ice?, arm1176jz-s?, coresight?, embedded trace macrocell? (etm), thumb ? , etm9?, amba?, arm7?, arm9?, arm7tdmi-s ?, arm926ej-s? of arm limited. oakdspcore ? , teaklite ? dsp core, ocem ? of parthusceva inc. indoorgps?, gl-20000?, gl-ln-22? of global locate. mipi? of mipi alliance. cat-iq? of dect forum. mips?, mips ii?, 24kec?, mips32 ? , 24kec? of mips technologies, inc. texas instruments ? , powerpad?, c62x?, c55x?, vlynq?, telogy software?, tm s320c62x?, code composer studio?, ssi? of texas instru ments incorporated. bluetooth ? of bluetooth sig, inc. irda ? of the infrared data association. java?, sunos?, solaris? of sun microsystems, inc. philips ? , i2c-bus ? of koninklijke philips electronics n.v. epson ? of seiko epson corporation. seiko ? of kabushiki kaisha hatt ori seiko corporation. panasonic ? of matsushita electric industrial co., ltd. murata ? of murata manufacturing company. taiyo yuden? of taiyo yuden co., ltd. tdk ? of tdk electronics company, ltd. motorola ? of motorola, inc. national semiconductor ? , microwire? of national semi conductor corporation. ieee ? of the institute of electrical and electronics engineers, inc. samsung ? , onenand ? , utram ? of samsung corporation. toshiba ? of toshiba corporation. dalla s semiconductor ? , 1-wire ? of dallas semiconductor corp. iso ? of the international organization for standardization. iec? of the internat ional engineering consortium. emv? of emvco, llc. zetex ? of zetex semiconductors. microtec ? of microtec research, inc. verilog ? of cadence design systems, inc. ansi ? of the american national sta ndards institute, inc. windriver ? and vxworks ? of wind river systems, inc. nucleus? of mentor graphics corporation. omnivision ? of omnivision technologies, inc. sharp ? of sharp corporation. symbian os ? of symbian software ltd. openwave ? of openwave systems, inc. maxim ? of maxim integrated products, inc. spansion ? of spansion llc. micron ? , cellularram ? of micron technology, inc. rfmd ? of rf micro devices, inc. epcos ? of epcos ag. unix ? of the open group. tektronix ? of tektronix, inc. intel ? of intel corpor ation. qimonda ? of qimonda ag. 1gonenand ? of samsung corporation. hyperterminal ? of hilgraeve, inc. matlab ? of the mathworks, inc. red hat ? of red hat, inc. palladium ? of cadence design systems, inc. sirius satellite radio ? of sirius satellite radio inc. toko ? of toko inc. the information in this document is subject to change without notice. last trademarks update 2008-11-17 revision history: 2010-09-20, rev.1.0 previous revision: page subjects (major cha nges since last revision)
datasheet 4 rev.1.0, 2010-09-20 TLE4966-3K trademarks of infineon technologies ag . . . . . . . . . . . . . . . . . . . . . . 3 1overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 pin configuration (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 general . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 circuit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3 application circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 electrical and magnetic parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 field direction definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 timing diagrams for the speed and direction output . . . . . . . . . . . . . 11 7 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7.1 package marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7.2 distance between chip and package surface . . . . . . . . . . . . . . . . . . . . . . 13 7.3 package outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 pcb footprint for pg-tsop-6-6-5 . . . . . . . . . . . . . . . . . . . . . . . . . . 14
product name product type ordering code package TLE4966-3K double hall switch sp000835522 pg-tsop-6-6-5 high sensitivity auto motive hall switch with direction detection TLE4966-3K datasheet 5 rev.1.0, 2010-09-20 1overview 1.1 features ? 2.7v to 24v supply voltage operation ? operation from unregulated power supply ? high sensitivity and high stability of the magnetic switching points ? high resistance to mechanical stress by active error compensation ? reverse battery protection (-18v) ? superior temper ature stability ? peak temperatures up to 195c ? low jitter (typ. 1 s) ? digital output signals ? excellent matching of the 2 hall probes ? hall plate distance 1.45mm ? speed and direction output signal ? smd package pg-tsop-6-6-5 1.2 functional description the TLE4966-3K is an integrated circuit dual hall-effe ct sensor designed specific ally for highly accurate applications which use a rotating pole wheel. precise magnetic switching points and high temperature stability are achieved by active compensation circuits and chopper techniques on chip. the sensor provides a speed output at q2 with the status (high or low) co rresponding to the magnetic field value. for positive magnetic fields (south pole) exceeding the threshold b op the output is low, whereas for negative magnetic fields (north pole) lower than b rp the output switches to high. the output q1 can be either high or low depending on th e direction of rotation of the pole wheel. this direction info rmation is calculated internally.
datasheet 6 rev.1.0, 2010-09-20 TLE4966-3K overview 1.3 pin configuration (top view) figure 1 pin definition and center of sensitive area table 1 pin definitions and functions pin no. symbol function 1 q2 speed 2 gnd recommended connection to gnd 3 q1 direction 4 v dd supply voltage 5 gnd recommended connection to gnd 6 gnd ground aea03645 66 year (y) = 0...9 month (m) = 1...9, o - october n - november d - decembe r s y m 123 4 5 pg-tsop6-6-5 0.15 0.73 0.15 0.8 6 1.45 center of sensitive area speed direction
datasheet 7 rev.1.0, 2010-09-20 TLE4966-3K general 2 general 2.1 block diagram figure 2 block diagram 2.2 circuit description the chopped dual hall switch comprise s two hall probes, bias generator, comp ensation circuits, oscillator, and output transistors. the bias generator provides currents for the hall probes an d the active circuits. compens ation circuits stabilize the temperature behavior and reduce influence of technology variations. the active error compensation rejects of fsets in signal stages and the influence of mechanical stress to the hall probes caused by molding and solder ing processes and other thermal stre sses in the package. this chopper technique together with the threshold generator and the comparator ensures high ac curate magnetic switching thresholds. voltage regulator (reverse polarity protected ) oscillator & sequencer bias and compensation circuits filter filter amplifier amplifier direction detection chopped hall probe esd v dd q2 comparator with hysteresis q1 gnd chopped hall probe
datasheet 8 rev.1.0, 2010-09-20 TLE4966-3K maximum ratings 2.3 application circuit it is recommended to use a series resistor r s with 200 : and a capacitor of c s = 4.7nf for protection against overvoltage and transients on the supply line  pull-up resistors r l are required for the output pins q 1 and q 2 . c s q 1 q 2 gnd TLE4966-3K v dd r s r l r l v s figure 3 application circuit 3 maximum ratings note: stresses above the ma x. values listed here may cause permane nt damage to the device. exposure to absolute maximum rating conditions for extended period s may affect device reliab ility. maximum ratings are absolute ratings; exceeding only one of these values ma y cause irreversible damage to the integrated circuit. table 2 absolute maximum ratings  t j = -40c to 150c parameter symbol limit values unit conditions min. max. supply voltage v dd v s v s -18  -18  -18 18  24  26 v  for 1 h, r s t 200 : for 5 min, r s t 200 : supply current through protection device i dd -50 50 ma output voltage v q -0.7  -0.7 18  26 v  for 5 min @ r l = 1.2 k : (pull up resistor) continuous output current i q -50 50 ma junction temperature t j ?  ?  ?  ? 155  165  175  195 c for 2000 h (not additive)  for 1000 h (not additive)  for 168 h (not additive)  for 3 x 1 h (additive) storage temperature t s -40 150 c magnetic flux density b ? unlimited mt
table 3 esd protection 1) 1) human body model (hbm) tests according to: eos/esd a ssociation standard s5.1-1993 and mil. std. 883d method 3015.7 parameter symbol limit values unit notes min. max. esd voltage v esd ? 4 kv hbm , r = 1.5 k : ,  c = 100 pf  t a = 25c datasheet 9 rev.1.0, 2010-09-20 TLE4966-3K operating range 4 operating range the following operating conditions must not be exceeded in order to ensure correct operation of the TLE4966-3K. all parameters specified in the following sections refer to theses operating conditions unless otherwise mentioned. table 4 operating range parameter symbol limit values unit conditions min. typ. max. supply voltage v dd v s v s 2.7  ?  ? ?  ?  ? 18  24  26 v  1 h with r s t 200 : for 5 min r s t 200 : output voltage v q -0.7 ? 18 v junction temperature t j -40  ? ?  ? 150  175 c  for 168 h output current i q 0?10ma
datasheet 10 rev.1.0, 2010-09-20 TLE4966-3K electrical and magnetic parameters 5 electrical and magnetic parameters product characteristics involve the spread of values g uaranteed within the specified voltage and temperature range. typical characteristics are the median of the production and correspond to v d = 12v and t a = 25c. table 5 electrical characteristics 1) 1) over operating range, unless otherwise specified. typical values correspond to v dd = 12 v and t a = 25c parameter symbol limit values unit conditions min. typ. max. supply current i dd 4 5.2 7 ma v dd = 2.7 v ... 18 v reverse current i sr 0 0.2 1 ma v dd = -18 v output saturation voltage v qsat ? 0.3 0.6 v i q = 10 ma output leakage current i qleak ? 0.05 10 p a for v q = 18 v output fall time t f ? 0.2 1 p s r l = 1.2 k : ; c l < 50 pf  see: figure 4 on page 11 output rise time t r ? 0.2 1 p s chopper frequency f osc ? 320 ? khz switching frequency f sw 0 ? 15 2) to operate the sensor at the max. s witching frequency, the magnetic signal amp litude must be 1.4 times higher than for static fields. this is due to the -3 db corner frequency of the low pass filter in the signal path. 2) khz delay time 3) systematic delay between magnetic threshold reached and output switching 3) t d ? 13 ? p s count signal delay t dc 50 200 1000 ns see: figure 5 on page 12 output jitter 4) jitter is the unpredictable devia tion of the output switching delay 4) t qj ? 1 ? p s rms typ. value for square wave signal 1 khz repeatability of magnetic thresholds 5) b rep is equivalent to the noise constant 5) b rep ? 40 ? p t rms typ. value for ' b / ' t > 12 mt/ms power-on time 6) time from applying v dd t 2.7 v to the sensor until the output state is valid 6) t pon ? 13 ? p s v dd t 2.7 v distance of hall plates d hall ? 1.45 ? mm thermal resistance 7) thermal resistance from junction to ambient calculation of the ambient temperature (pg-tsop-6-6-5 example)  e.g. for v dd = 12.0 v, i ddtyp = 5.5 ma, v qsattyp = 0.3 v and 2 x i q = 10 ma   power dissipation: p dis = 72.0 mw.  in t a = t j ? ( r thja u p dis ) = 175c ? (100 k / w u 0.072 w)  resulting max. ambient temperature: t a = 167.8c 7) r thja ? 100 ? k/w pg-tsop-6-6-5
table 6 magnetic characteristics 1) . 1) over operating range, unless otherwise specified. typical values correspond to v dd = 12 v and t a = 25c parameter symbol limit values unit conditions min. typ. max. operate point b op 0.8 2.5 4.2 mt release point b rp -4.2 -2.5 -0.8 mt hysteresis b hys 3.7 5.0 6.3 mt magnetic matching  b match -2.0 2.0 mt valid for t a = 25c  b op1 - b op2 and  b rp1 - b rp2 temperature compensation of magnetic thresholds tc ? -350 ? ppm/c datasheet 11 rev.1.0, 2010-09-20 TLE4966-3K timing diagrams for the speed and direction output field directio n definition positive magnetic fields related with south pole of the magnet to the branded side of package. 6 timing diagrams for the speed and direction output figure 4 timing definition of the speed signal applied magnetic field 90% 10% v q t f t d t r t d b op b rp
datasheet 12 rev.1.0, 2010-09-20 TLE4966-3K timing diagrams for the speed and direction output figure 5 timing definition of the direction signal figure 6 definition of the direction signal rotation direction state of direction output q1 left to right low right to left high t dc speed direction t dc t change of direction n n n n n n s s s s s s rotation direction branded side of ic
datasheet 13 rev.1.0, 2010-09-20 TLE4966-3K package information 7 package information 7.1 package marking z3 year (y) = 0 ...9 month ( m) = 1...9 , o - october n-november d-december s y m figure 7 marking pg-tsop-6-6-5 7.2 distance between chip and package surface branded side d mm 0.1 0.56 figure 8 distance chip to upper side of ic 7.3 package outlines figure 9 pg-tsop-6-6-5 (plastic thin small outline package) 1.6 ?.1 2.6 max. 1.1 max. acc. to din 6784 +0.2 0.1 max. (2.25) +0.1 -0.05 0.35 (0.35) gpx09300 10 ? max. 10 ? max. 2.9 ?.2 b 0.2 m b 6x 0.95 1.9 a 0.2 a m 0.15 +0.1 -0.06 3 2 1 4 5 6
datasheet 14 rev.1.0, 2010-09-20 TLE4966-3K package information pcb footprint for pg-tsop-6-6-5 the following picture shows a recommendation for the pcb layout. 0.5 0.95 1.9 2.9 hlg09283 r emark: wave soldering possible dep. on customers process condition s figure 10 footprint pg-tsop-6-6-5 you can find all of our packages, sorts of packing and others in our  infineon internet page ?products?: http://www.infineon.com/products . dimensions in mm
published by infineon technologies ag www.infineon.com


▲Up To Search▲   

 
Price & Availability of TLE4966-3K

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X